Subaru Impreza 2016, Manual

Page: 530 / 600

Black plate (544,1)
一 般
Model "A1250GE-A" EDITED: 2015/ 8/ 4
11-50
Maintenance and service/Replacing bulbs
Replacing bulbs
WARNING
Bulbs may become very hot while
illuminated. Before replacing bulbs,
turn off the lights and wait until the
bulbs cool down. Otherwise, there is
the risk of sustaining a burn injury.
CAUTION
Replace any bulb only with a new
bulb of the specified wattage. Using
a bulb of different wattage could
result in a fire. For the specified
wattage of each bulb, refer to
“
Bulb
chart
” F
12-18.
Do not touch the glass portion of the
light bulb with bare hands. When
holding the glass portion is una-
voidable, hold it using a clean dry
cloth to avoid getting moisture and
oils on the bulb. Also, if the bulb is
scratched or dropped, it may blow
out or crack.
&
Headlights (models with HID
headlights)
WARNING
High-intensity-discharge (HID) bulbs
are used for the low beams of the
headlights. These HID bulbs use an
extremely high voltage. To avoid the
risk of an electric shock that could
result in serious injury, observe the
following precautions.
.
Do not replace any headlight
bulbs (both low beam and high
beam) by yourself.
.
Do not remove/restore the head-
light assemblies by yourself.
.
Do not remove any headlight-
assembly components by your-
self.
For replacement, we recommend
that you contact your SUBARU deal-
er.
&
Headlights (models without
HID headlights)
CAUTION
Halogen headlight bulbs become
very hot while in use. If you touch
the bulb surface with bare hands or
greasy gloves, fingerprints or
grease on the bulb surface will
develop into hot spots, causing the
bulb to break. If there are finger-
prints or grease on the bulb surface,
wipe them away with a soft cloth
moistened with alcohol.
NOTE
.
If headlight aiming is required, we
recommend that you consult your
SUBARU dealer for proper adjustment
of the headlight aim.
.
It may be difficult to replace the
bulbs. We recommend that you have
the bulbs replaced by your SUBARU
dealer if necessary.