ME(H4SO)-39
MECHANICAL
Engine Assembly
10) Install the power steering pump on bracket.
(1) Install the power steering tank on bracket.
(2) Install the power steering pump on bracket,
and then tighten the bolts.
Tightening torque:
20.1 N·m (2.05 kgf-m, 14.8 ft-lb)
(3) Tighten the bolts which install the power
steering pipe bracket, and then install the spark
plug cords.
(4) Connect the power steering switch connec-
tor.
(5) Install the front side V-belt, and adjust it.
<Ref. to ME(H4SO)-43, FRONT SIDE BELT, IN-
STALLATION, V-belt.>
(6) Install the resonator chamber.
Tightening torque:
33 N·m (3.4 kgf-m, 24.6 ft-lb)
11) Tighten the nuts which hold the lower side of
transmission to engine.
Tightening torque:
50 N·m (5.1 kgf-m, 36.9 ft-lb)
12) Tighten the nuts which install the front cushion
rubber onto crossmember.
Tightening torque:
85 N·m (8.7 kgf-m, 63 ft-lb)
NOTE:
Make sure the front cushion rubber mounting bolts
(A) and locator (B) are securely installed.
13) Install the front and center exhaust pipe. <Ref.
to EX(H4SO)-7, INSTALLATION, Front Exhaust
Pipe.>
FU-00020
FU-00139
FU-00877
FU-00878
IN-00044
ME-00219
ME-00056
(A)
(A)
(B)
(B)
