ME(H4SO)-36
MECHANICAL
Engine Assembly
(4) Remove the bolts which install the power
steering pump bracket.
(5) Remove the power steering tank from
bracket by pulling it upward.
(6) Place the power steering pump on right side
wheel apron.
15) Remove the front and center exhaust pipe.
<Ref. to EX(H4SO)-6, REMOVAL, Front Exhaust
Pipe.>
16) Remove the nuts which hold the lower side of
transmission to engine.
17) Remove the nuts which install the front cushion
rubber onto front crossmember.
18) Separate the torque converter clutch from drive
plate. (AT model)
(1) Lower the vehicle.
(2) Remove the service hole plug.
(3) Remove the bolts which hold the torque
converter clutch to drive plate.
(4) Remove other bolts while rotating the en-
gine using socket wrench.
19) Remove the pitching stopper.
20) Disconnect the fuel delivery hose (A), return
hose (B) and evaporation hose (C).
CAUTION:
• Disconnect the hose with its end wrapped
with cloth to prevent fuel from splashing.
FU-00139
FU-00020
FU-00140
ME-00210
ME-00211
ME-00212
ME-00213
