IMPREZA-3A-5089
Wiring - I
1. Wiring connections on back of audio unit
1. Connect the AUX cable 4-pin connector to the connection
point shown in Figure 1.
2. Connect the ground cable to the connection point shown in
Figure 2.
3. Route the AUX cable under the shift lever (passenger seat
side). Put the audio unit back in its original place and
screw it in.
Route cable under shift lever (passenger seat side)
Figure 2
Figure 1
Wiring - II
1. Hooking up the AUX terminal
1. An AUX terminal is provided on the back of the center
console box.
2. Hook up the AUX cable to the terminal.
Back of center console box
AUX cable hook-up point
2. Wiring the center console box
1. Take the slack out of the AUX cable routed under the
shift lever (passenger seat side).
2. Tie the AUX cable and the existing vehicle cables
together near the two points shown in the figure at
right.
3. Re-install all the panels in their original place.
Tie cables together
near this point
Existing vehicle
cables
Tie cables together
near this point
AUX cable
Connect to
AUX terminal
