5 OF 12
ISSUE
-
DATE
10 Jan 2018
SUBARU OF AMERICA
PART NUMBER
H001SXC100
5
1. Locate and release the vehicle’s 6-pin pre-fi t ignition connector
secured to the vehicle’s wire harness with breakaway tape
near the base of the steering column. (FIGURE K)
2. Locate and release the vehicle’s 4-pin and 2-pin pre-fit
connectors secured to the vehicle’s wire harness with
breakaway tape near the upper driver’s side kick panel area.
(FIGURE L)
3. When the vehicle’s 4-pin and 2-pin pre-fi t connectors are free
from the breakaway tape, unplug and discard the 2-pin mating
connector/wire jumper. (This is used for the power window
interrupt circuit).
4. Route the remote engine start harness 4-pin and 2-pin
connectors over the steering column toward the driver’s side
kick panel area. (FIGURE M)
REMOTE ENGINE START WIRE HARNESS CONNECTIONS / ROUTING
FIGURE L
FIGURE K
FIGURE M
Back of
Fuse Box
