17
EN
FR
DE
NL
ES
IT
PT
GR
NO
SE
FI
DK
RU
1
NOTE :
Clean and replace air cleaner elements more often when operating in dusty environments. Replace the element in case that dirt or
dust can not be removed and/or that the element is deformed or deteriorated.
6. BLADE INSPECTION (MOWER ONLY)
In case of blade inspection, drain fuel and oil before maintenance.
if these process do not skip, it may case trouble.
7. FUEL HOSE REPLACEMENT
WARNING
Take extreme caution when replacing fuel hose ;
gasoline is extremely
fl
ammable.
Replace the fuel hose every 2 years.
If fuel leaks from fuel hose, replace the fuel hose immediately.
8. CHECKING BOLTS, NUTS AND SCREWS
■
Retighten loose bolts and nuts.
■
Check for fuel and oil leaks.
■
Replace damaged parts with new ones.
1
2
B. Urethane Foam Element Type
Remove the element and wash it in a solution of mild detergent and warm
water. Then rinse the element thoroughly in clean water. Allow the element
to dry thoroughly. Apply a tablespoon (6cc) of motor oil to the clean and
dry foam element and squeeze the element several times to distribute the
oil evenly throughout the foam. Then squeeze the foam element in a paper
towel to absorb any excess oil.
❶
Urethane Foam Element
C. Dual Element Type
■
For urethane foam, remove it from the paper element and wash it
thoroughly with detergent. Then dry it before installing.
■
For the paper element, clean by blowing on it with compressed air
from the inside or tapping on it gently to remove dirt. Change the
paper element when doing this fails to remove the dirt.
❶
Paper Element
❷
Urethane Foam Element
EA175̲190V̲en̲EU7482.indd 17
EA175̲190V̲en̲EU7482.indd 17
2013/01/15 20:35:34
2013/01/15 20:35:34
Summary of Contents for EA175V
Page 23: ......
