Remove any dirt by washing the entire surface,
shown in the figure on the left, on which the air
outlet garnish is to be installed, and degrease
the surface with a cleaning detergent.
After degreasing the surface prior to installation,
pay attention to prevent the adherence of dirt or
dust. Carry out the installation work after the
surface is completely dry. [Figure 1]
Use a pair of scissors to cut out the paper
patterns printed on the supplied paper.
(The paper patterns shown in this manual are
identical to those shown in the supplied
paper.）
Place the paper pattern to align its edges with
the fender's edges, and attach it with masking
tape, etc.
3
When using a cleaning detergent, be
careful with fire and carry out the
installation work in a well ventilated area.
（2） Preparing paper patterns and attaching them to the car
（1） Cleaning and degreasing the surface on which the product is to be installed
Installation guidelines
【Figure 1】
【Figure 2】
Surface on which
the product is to be
installed
Caution
Edge
Edge
This drawing shows how to install the product on the LH side.
0
50mm
0
2in
Scale
0
50m
m
0
2i
n
S
ca
le
R H
L H