2
AIR OUTLET GARNISH
Request
Before installing this product, please ensure to read this manual and carry out proper installation.
For installation workers
This manual explains how to install and handle the air outlet garnish.
！
Precautions
1. When attaching this product to a car, park the car on a flat surface and securely apply
the parking brake before carrying out the work.
2. When attaching this product to a car, handle it with great care and do not drop it or step
on it, otherwise it may get damaged.
3. Before starting the installation work, wash the car and use nonane and a waste cloth to
wipe off dirt, oil films, etc. adhered to around the fenders. If cleaning is insufficient, it
may cause this product to peel.
4. The adhesive strength of the double-sided tape attached to this product decreases when
the air temperature is 15 °
C or lower. Before attaching this product, use a hair dryer to
warm up the double-sided tape and the surface of the area where this product will be
attached.
5. Do not use thinner or other solvents on the coating surfaces of the air outlet garnishes,
or the surfaces may become deteriorated. Keep them away from fire; otherwise, they
may become deformed.
6. Do not forcibly bend the air outlet garnishes or rub them with something sharp;
otherwise, the coating surfaces may become damaged.
7. The air outlet garnish does not provide sufficient adhesive strength when it is
reattached to a car. Therefore, carry out the work with care to prevent the need for
reattachment work. Moreover, absolutely avoid getting the car wet by washing it, etc.
within 24 hours after the installation work is complete. Otherwise, it may cause the
adhesive to peel.
8. During the installation work, pay careful attention not to damage the car.
9. In particular, we ask you to strictly observe the " ! Precautions" in order to carry out the
installation work safely and securely without physically damaging components, etc.
10. After completing the attachment of this product, ensure that there is no peeling in the
attached area or no adhesive joint failure, including separation.
11. When a car has undergone a body coating treatment including glass coating, this
product cannot exhibit its original adhesive performance.
Please confirm whether or not a body coating treatment is applied to the car.
Moreover, ensure to remove dirt, oils and fats, etc. adhering to the surface on which the
product is to be attached, and also use sufficient pressure to attach it to the car.
<<How to remove a body coating film and confirm the removal>>
- Use a fine-grained compound agent (so as not to affect the car's paint) to rub the coating
film off the area on which the product is to be attached.
- After polishing the area, spray water on it. You can confirm that the coating film has been
removed when there is no repelling of water on the area.