Subaru BRZ 2021, Manual

Page: 474 / 584

472
5-2. Steps to take in an emergency
BRZ_EGE
■
If the tire pressure monitoring system is inoperative (if equipped)
The tire pressure monitoring system will be disabled in the following condi-
tions:
(When the condition becomes normal, the system will work properly.)
●
If tires not equipped with tire pressure warning valves and transmitters
are used.
●
If the ID code on the tire pressure warning valves and transmitters is not
registered in the tire pressure warning computer.
●
If the tire inflation pressure is 380 kPa (3.80 kgf/cm
2
or bar, 55 psi) or
higher.
The tire pressure monitoring system may be disabled in the following condi-
tions:
(When the condition becomes normal, the system will work properly.)
●
If electronic devices or facilities using similar radio wave frequencies are
nearby.
●
If a radio set at similar frequencies is in use in the vehicle.
●
If a window tint that affects the radio wave signals is installed.
●
If there is a lot of snow or ice on the vehicle, in particular around the
wheels or wheel housings.
●
If non-genuine SUBARU wheels are used. (Even if you use SUBARU
wheels, the tire pressure monitoring system may not work properly with
some types of tires.)
●
If tire chains are used.
●
If a large metallic object which can interfere with signal reception is put in
the luggage compartment.
■
If the tire pressure warning light frequently comes on after blinking for
approximately one minute (if equipped)
If the tire pressure warning light frequently comes on after blinking for
approximately one minute when the push-button ignition switch is turned to
“ON” mode, have it checked any authorized SUBARU dealer or repairer, or
another duly qualified and equipped professional.