Subaru AUDIO VIDEO & NAVIGATION SYSTEM, Owner'S Manual

Page: 33 / 84

- 31 -
CD Player Operations
4
Using the CD Player
Listening To a CD
Insert a CD into the disc slot, and it will start
playing.
(1) Press the [SRC] button repeatedly until
“CD” is displayed on the sub-display.
Play the CD.
ATTENTION
• If track titles and other data are recorded in
the CD-Text, you can display them.
• Note that the CD-Text of a CD-R/RW disc
may not be displayed.
Selecting a Desired Track
You can cue a desired track.
(1) Press the [SELECT (Right)] or [SELECT
(Left)] button.
To the right: Advances to the next track.
To the left (pressing once): Returns to the
beginning of the track being played.
To the left (pressing more than two times):
Returns to the previous track.
SRC button
Track selection (start point) / Fast-forward
(rewind) button
Song information switching button
BAND button
CAUTION
• Do not press the [ (OPEN/EJECT)] button
when you are inserting a CD into disc slot.
This may cause a personal injury and
damage to the front panel.
• Do not drive your car while the front panel of
this receiver is kept open. The panel may
cause unexpected personal injury in the
case of a sudden stop or similar event.
• Do not attempt to close the front panel by
hand. Doing so may damage the panel.
IMPORTANT
• Playback may be intermittent when there is a
scratch on a CD or when the recorded side
is dirty.
• If the following CD name and logo are
shown, the disc title and track titles are also
recorded on the disc.
Text information will be displayed during
playback.