Subaru 2013 Legacy, Owner'S Manual

Page: 148 / 510

Black plate (149,1)
北 米
Model "A2490BE-A" EDITED: 2012/ 4/ 25
the ignition switch is in the
“
ON
”
position.
The odometer shows the total distance
that the vehicle has been driven.
If you press the trip knob when the ignition
switch is in the
“
LOCK
”
/
“
OFF
”
or
“
Acc
”
position, the odometer/trip meter will light
up. If you do not press the trip knob within
10 seconds of illumination of the od-
ometer/trip meter, the odometer/trip meter
will turn off.
Also, if you open and close the driver
’
s
door within 10 seconds of illumination of
the odometer/trip meter, the odometer/trip
meter will turn off.
&
Double trip meter
Type A
Type B
1) Trip knob
This meter displays the two trip meters
when the ignition switch is in the
“
ON
”
position.
The trip meter shows the distance that the
vehicle has been driven since you last set
it to zero.
If you press the trip knob when the ignition
switch is in the
“
LOCK
”
/
“
OFF
”
or
“
Acc
”
position, the odometer/trip meter will light
up. It is possible to switch between the A
trip meter and B trip meter indications
while the odometer/trip meter is lit up. If
you do not press the trip knob within 10
seconds of illumination of the odometer/
trip meter, the odometer/trip meter will turn
off.
Also, if you open and close the driver
’
s
door within 10 seconds of illumination of
the odometer/trip meter, the odometer/trip
meter will turn off.
The display can be switched as shown in
the following illustration by pressing the
trip knob.
*
1
: Models with type B combination meter
only: These indications cannot be
displayed when the ignition switch is
in the
“
ON
”
position.
*
2
: MT models only
To set the trip meter to zero, select the A
trip or B trip meter by pressing the knob
and keep the knob pressed for more than
2 seconds.
CAUTION
To ensure safety, do not attempt to
change the function of the indicator
Instruments and controls
3-9
–
CONTINUED
–
3