Subaru 2013 Legacy, Owner'S Manual

Page: 100 / 510

Black plate (101,1)
北 米
Model "A2490BE-A" EDITED: 2012/ 4/ 25
Keys
NOTE
For models with
“
keyless access with
push-button start system
”
, refer to
“
Keyless access with push-button start
system (Outback
–
if equipped)
” F
2-9.
1) Master key
2) Submaster key
3) Valet key
4) Key number plate
5) Security ID plate
Three types of keys are provided for your
vehicle:
Master key, submaster key and valet key.
The master key and submaster key fit all
locks on your vehicle.
.
Ignition switch
.
Driver
’
s door
.
Glove box
.
Trunk lid (Legacy)
The valet key fits only the ignition switch
and door locks. You can keep the trunk
and glove box locked when you leave your
vehicle and valet key at a parking facility.
CAUTION
Do not attach a large key holder or
key case to either key. If it bangs
against your knees while you are
driving, it could turn the ignition
switch from the
“
ON
”
position to the
“
Acc
”
or
“
LOCK
”
position, thereby
stopping the engine.
&
Key number plate
1) Key number plate
2) Security ID plate (models without
“
key-
less access with push-button start sys-
tem
”
)
The key number is stamped on the key
number plate attached to the key set.
Write down the key number and keep it in
another safe place, not in the vehicle. This
number is needed to make a replacement
key if you lose your key or lock it inside the
vehicle.
To make replacement keys, the security ID
is also needed. Refer to
“
Key replacement
(models without
“
keyless access with
push-button start system
”
)
” F
2-5.
Keys and doors
2-3
2