Subaru 2007 Forester, Owner'S Manual

Page: 165 / 357

5-10
Audio
the discs contained in the CD changer
only by pressing the corresponding num-
ber on one of the disc select buttons. If
you are to listen to the 5th disc in the CD
changer, press the “ 5 ” button of the disc
select buttons. All other discs in the CD
changer can also be selected in a similar
way.
NOTE
No disc change takes place if the
button corresponding to the storage
tray in which no disc is loaded is
pressed.
If the disc select button correspond-
ing to the disc now in playback is
pressed again, the disc will be replayed
from its beginning.
To select a song from its beginning
Forward direction
Briefly press the “ ” side of the button
(17) to skip to the beginning of the next
track. Each time this side of the button is
pressed, the indicated track number will
increase.
Backward direction
Briefly press the “ ” side of the button
(17) to skip to the beginning of the current
track. Each time this side of the button is
pressed, the indicated track number will
decrease.
Fast-forwarding and fast-reversing
Fast-forwarding
Press the “ ” side of the button (17)
continuously to fast-forward the disc.
Release the button to stop fast-forward-
ing.
If you continue fast-forwarding to the end
of the disc, the CD changer will automati-
cally stop fast-forwarding and start play-
back beginning with the first track on the
current disc.
Fast-reversing
Press the “ ” side of the button (17)
continuously to fast-reverse the disc.
Release the button to stop fast-reversing.
If you continue fast-reversing to the begin-
ning of the disc, the CD changer will auto-
matically stop fast-reversing and start
playback beginning with the first track on
the current disc.
Repeat playback
Press the “ RPT ” button (19) while a song
is playing to play the song repeatedly. The
“ RPT ” indicator will come on and the song
will be played continuously. To cancel the
repeat mode, press the button again.
Then the “ RPT ” indicator goes out, and
normal playback mode is restored.
Random playback
Press the “ RAND ” button (18) while a disc
is being played back to play all songs on
the disc in a random order. The “ RAND ”
indicator will come on and all songs on the
disc will be played in a random order.
To cancel the random mode, press the
button again. Then the “ RAND ” indicator
goes out, and normal playback mode is
restored.
Scan (a convenient way to become
familiar with a disc)
1. Press the “ SCAN ” button (20).
– The display shows “ SCAN ” and the
track number being scanned.
– You hear the first 10 seconds of each
track.
– The operation is automatically
cleared after playing all programs.
Then, normal playback starts.
2. Press the “ SCAN ” button again when
you hear a track you like.
– Normal playback resumes.
To stop playback
To stop playback and switch over to the
radio mode, press the “ BAND ” button.