IMPREZA U.S.A. (E)
1-10
remote transmitter.
3. The instrument panel lights will flash when the parking lights
flash.
4. Your SUBARU Keyless Entry System is equipped with two
remote transmitters.
B
Programming button location
HS1001BB
The Programming Button is located under the driver’s side dash
beneath the diagnostic connector.
B
Adding or deleting remote transmitters
Up to four (4) transmitters can be programmed to your keyless entry
system.
NOTE
Make sure no one else is operating another keyless entry or
security system within range of your vehicle when you are pro-
gramming remote transmitters. Another transmitter code could
be inadvertently “learned” by your system, allowing someone
unauthorized access to your vehicle.
n
To program an additional transmitter
1. Open the driver’s door.
2. Turn the vehicle ignition to the “ON” position.
3. Press and hold the Programming button in.
D
After approximately 15 seconds, the door locks will cycle 3 times.
