16
|
English
SUB-ZERO WINE STORAGE
Electrical
The electrical supply must be located within the shaded
area shown in the illustration and chart below. A separate
circuit, servicing only this appliance is required. A ground
fault circuit interrupter (GFCI) is not recommended and may
cause interruption of operation.
Installation must comply with all applicable electrical codes.
ELECTRICAL REQUIREMENTS
Power Supply
220-240 V AC, 50/60 Hz
Circuit Breaker
10 amp
Receptacle
grounding-type (earthed)
ELECTRICAL SUPPLY LOCATION
WIDTH
A
457 mm Model
152 mm
610 mm Model
241 mm
762 mm Model
318 mm
A
6 mm
108
mm
114 mm
FRONT VIEW
FLOOR
LEFT SIDE
OF OPENING
E
Electrical supply location.