Sub-Zero 700TF Planning Information Download Page 1

Planning Information

Model 700TF(I)

All Freezer

1

Dimensions in parentheses are in
millimeters unless otherwise specified.

10/05

The Sub-Zero Model 700TF and

700TFI integrated design accepts custom

wood or stainless steel door and drawer

panels. Stainless steel panels and handles

are available as sales accessories in three

finishes—classic, platinum and carbon.

E

rgonomically, this unit works—doors above the

counter and drawers below counter level. The shallow

depth enables you to view everything quickly and you

can grab those items and be out of the unit quickly.

The drawers have full extension and are a nice way to

bring the items to you and not have to bend down and

look inside for your package.

As with the two drawer freezer this tall cousin can be

ordered with or without the automatic ice maker.

The door swing must be specified when ordering this

unit.

With the installation of a harness kit, these appliances are Star-K
compliant to meet strict religious regulations in conjunction with
specific instructions found on star-k.org. You may purchase this
harness kit through your Sub-Zero dealer. To obtain local dealer
information, visit the Locator section of our website, subzero.com.

Magnetic door /
drawer gaskets 

Adjustable spill-proof
glass shelves

Electronic digital
control panel

Seamless
molding

Model 700TF

Adjustable door
shelves

Model 700TFI
with Ice Maker

Lower freezer
storage drawer

Upper freezer
storage drawer

Front venting with
removable kickplate

Automatic ice maker
(Model 700TFI)

Location of serial
number 

Stationary shelf

Summary of Contents for 700TF
















Reviews: