ionCut 40 PADV
Copyright © Mundaka Welding & Gases, Inc.
6
Production cut for Carbon
Steel (mm)
≤12
≤16
Production cut for Stainless
Steel (mm)
≤12
≤18
Production cut for Aluminum
(mm)
≤8
≤14
Production cut for Copper
(mm)
≤6
≤8
Weight(Kg)
7.6
Note: The above parameters are subject to change with the improvement of machines.
3. Installation
3.1 Unpacking
1. Use the packing lists to identify and account for each item.
2. Inspect each item for possible shipping damage. If damage is evident, contact your
distributor and / or shipping company before proceeding with the installation.
3.2 Input Power Connections
Note: Check your power source for correct voltage before plugging in or connecting the unit
3. 3 Gas Connections
a) Connecting Gas Supply to Unit
b) Connect the gas line to the inlet port of the gas filter on the rear panel.