Pride Stylus 405/436
www.pridemobility.com
9
TRANSPORTING YOUR PRIDE STYLUS
Currently, there are no approved stan-
dards for tie-down systems used to secure
your wheelchair to a moving vehicle of any
type while you or anyone else is seated in
the wheelchair. Although your wheelchair
may be equipped with a positioning belt,
this belt is not designed to provide proper
restraint during motor vehicle transport.
Anyone travelling in a motor vehicle should
be properly secured in the motor vehicle
seat with safety belts securely fastened.
The Pride Stylus was designed to be folded
and stored in a secure location such as in
the boot of a car.
NOTE: You can also remove the drive
wheels to make the wheelchair more
compact. See figure 7.
To lift or carry the Pride Stylus:
1.
Fold the Pride Stylus.
2.
With one hand, grab and squeeze to-
gether both seat cane handles. See
figure 6.
3.
With the other hand, grab and squeeze
together both seat base rails.
To remove the drive wheel:
1.
Press the quick-release button and pull
the drive wheel off. See figure 7.
2.
When reinstalling the drive wheel, make
sure that the wheel axle is snapped se-
curely into the frame bracket.
3.
Repeat for the other drive wheel.
WARNING! Prevent injury. If you re-
move the drive wheels, make sure
the quick-release buttons snap into
place when reinstalling a wheel. See
figure 7.
Figure 5. Folding the Pride Stylus
Figure 6. Lifting Points
SEAT CANE HANDLES
SEAT BASE RAILS
Figure 7. Removing the Drive Wheel
QUICK-RELEASE
BUTTON
