8
Installation
1
Install front panel
Set center front panel (D) down on a non-scratch surface. Insert four wooden dowels (AA) into holes on left and right sides of
center front panel (D). Align the holes on center front panel (D) with the corresponding holes on left front panel (C) and right front
panel (E). Adjust the metal plate on the center front panel (D) to align with the corresponding holes on the left front panel (C) and
right front panel (E), securing with two short screws (BB).
2
Screw connecting rod
Screw six connecting rods (DD) into the designated plastic bushings on the back of the left front panel (C) and right front panel
(E). Fully tighten with a Phillips screwdriver.
D
E
C
DD
AA
BB
D
E
C
2
1
1
3
