5
Lowes.com
5
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time:
45 minutes
Tools Required for Assembly (not included): Phillips screwdriver
SAFETY INFORMATION
•
DO NOT
slide insert on top of wood to avoid scratching wood surface.
•
DO NOT
place any objects on top of insert and top air intake vents as this will cause unit to
overheat and can cause a fire.
•
Non-rechargeable batteries are not to be recharged. Exhausted batteries are to be removed from
the product.
Electrical Connection
• A 15-Amp, 120-volt, 60 Hz circuit with a properly grounded outlet is required. Preferably, the
fireplace will be on a dedicated circuit as other appliances on the same circuit may cause the
circuit breaker to trip or the fuse to blow when the heater is in operation. The unit comes standard
with 6-ft. three-wire cord, exiting from the rear of the fireplace.
DO NOT
exceed the current rating
of the current tap.
AlWAYS
plug heaters directly into a wall outlet/receptacle.
NEvER
use with an
extension cord or relocatable power tap (outlet/power strip).
• This heater is for use on 120 volts. The cord has a plug as shown below. See illustration for
grounding instruction. An adapter as shown at C is available for connecting three-blade grounding
type plugs to two-slot receptacles. The green grounding plug extending from the adapter must be
connected to a permanent ground such as a properly grounded outlet box. The adapter should not
be used if a three-slot grounded receptacle is available.
SAvE THESE INSTRUCTIONS
A
B
C
D
Grounding Pin
Grounding Pin
Grounding Means
Metal
Screw
Cover of
Grounding
Box
Adapter
