12
Lowes.com
OPERATING INSTRUCTIONS
Power Button
• Press the power button to turn the main power to the unit ON or OFF.
• When the unit is turned ON, the lights under the emberbed will light to indicate the unit has power.
Flame Brightness Button
• If the unit is powered OFF, you can press the flame brightness button to power On the unit. The
emberbed will glow at the lowest brightness setting unless a different setting was saved in the
memory.
• Press the button again to scroll through the flame brightness settings,1 (lowest) through 5
(brightest).
Temperature Button
• The temperature button controls the heater thermostat.
• If the unit is powered OFF, you can press the temperature button to power On the unit. The
emberbed will glow at the lowest brightness setting unless a different setting was saved in the
memory.
• Press the temperature button again to scroll through the pre-set temperature settings:
– Fahrenheit: 65, 70, 75, 80, 85, 90, OFF.
– Celsius: 18, 21, 24, 27, 29, 32, OFF.
• Hold down the temperature button for 5 seconds to toggle between Fahrenheit and Celsius. A
small “F” or “C” will display next to the temperature.
M
To use the remote
control, first remove
the plastic tab by
gently pullling it out
of remote control (M).
M
Remote Control
M
To use the remote control,
first remove the plastic tab
by gently pullling.
M
To use the remote control,
first remove the plastic tab
by gently pullling.
M
L
Insert
M
To use the remote control,
first remove the plastic tab
by gently pullling.
