- 7 -
DETERMINING SETTING
The Infuzium 420 has 5 presets to allow for easy use (see chart below).
If you want to try your own settings, you can select Do-It-Yourself (DIY).
The DIY setting is preset, but once it is selected you can use the + and -
buttons for Temp and Time to adjust accordingly.
To choose the setting you want to use, press the select button until the
LED light above the option you want is lit.
Once a preset has been selected, you can change the time and
temperature to customize the setting. This is done by pressing the + or -
on temp or time to adjust accordingly.
The Time setting is adjustable from 30 min to 12 hours in 5 minute
increments. The Temperature setting is adjustable from 31°F to 250°F (1°
increments).
PRESETS
MODE
TEMP (°F)
TIME (hours)
Oil
160°F
1:00
Butter
160°F
2:00
DIY
160°F
1:30
Tincture
160°F
4:00
Clean
--
--5*
* This indicates 5 cycles
The cleaning preset runs for just a little over 2 minutes. The blade will
rotate for about 20 seconds and then stop for about 5 second. It cycles
through this 5 times. When it is complete the LED at the top of the side
handle will turn green.
