11
CHANNELS SCREEN
FULL MODE
Above is a computer screenshot showing the
digiLiVE 8C
Channels
screen when the
control app is running in
Full
mode, in which all the available faders and sub-page tabs are
displayed. Depending on the screen size you are using, you may see fewer faders. Swiping
left or right, or using the
Left-Right Arrow
buttons will allow you to access any hidden
faders. The left-hand menu and the channel menu bar above the faders always remain
visible on-screen, giving you one-touch access to each of the control app‘s sub-pages.
Due to screen size restrictions, a mobile phone or similar-sized device displays only the
faders from the Channels screen and gives no access to any sub-menu.
The Channels screen shows you fader position, pan position and signal level for each of the
digiLiVE’s input and output channels. The signal meter can display either Pre-fader or Post-
fader levels, and you make your choice on the Meters sub-page, which is selected from the
left-hand menu.
The larger fader cap and white border around the channel menu bar (see CH6 above)
indicate that a channel is active and can be edited using any of the available module tabs in
the channel menu bar. A function is available if its tab is coloured light-grey. If its tab is dark,
the function is not available.
PLEASE NOTE: Double-tapping an on-screen input or output channel fader or balance
control will reset that fader or balance control to its 0dB or Centre position. The Main
Mix output fader is the major exception to this rule.
