Studiomaster AC36II Owner'S Manual Download Page 18

16

Digital Audio Processor

SAFETY INSTRUCTION

PLEASE READ THESE SAFETY MATTERS CAREFULLY BEFORE USE

  This product must make sure connect to the ground correctly. If it has broken down, to avoid any electric 

    shock, the device power cord and plug both equipped safety ground connection. The power cord should 
    according to the requirement to install and ground connection.
    

Warning: 

Incorrect ground connection might be caused electric shock happen!

    If you have any inquiry about the ground connection, please let qualified people checking it or fix it

do 

    not change it by yourself. If the power plug is unsuitable, you can entrust electrician or professional staff to 
    install the suitable power plug.

  To avoid the risk of injury, please close supervision when using the product near child.

  Please do not use the device at wet place, such as: near bathtub, washbasin, kitchen sink, wet basement 

    or near swimming pool and lake.

  It should not be placed near the device which filled with liquids such as the vase.

  This product should install at draughty place or dry environment.

  The power source type must be match to the operation instruction or the volts type which on the product.

  The product must keep away from heat source, such as: electric heater, electric blanket or other heat 

    source products.

  The product equipped one power cord that complied with safety certification. If you can't insert the power 

    cord into the plug, please contact electrician or professional staff to change the old plug. Attention that 
    should not break the power plug safety device.

  If the product not for operation for a long time. Please pull out the power cord from power plug. Don't drag 

    the power cord

  This product use coupler as a make and break device, should be maintained convenient operation

  Please don't operate the product when following things opened, should call qualified people checking it 

    or fix it:
    A. Power cord damaged.
    B. Objects or liquid get into the product.
    C. The product is sopping with rain.
    D. The product can not operate correctly or show obvious unusual.
    E. The product dropped down, damaged.

  Any inquiries about the product which not mentioned in the user manuals, please contact the eligible 

    electrician or professional staff to repair.

● Only apply to security use which area below altitude of 2000m.

● Only apply to security use which condition except  tropical climate.

Pay attention to the dangerous voltage of the 
insulation within the products. It  may be 
considerable damage to human body.

Important Notices and Operation Instructions.

WARNING:

Please do not let the heavy extrusion or stamp on the power cord, avoid by all pull or distort the power cord.
To avoid the risk of fire or electric shock, please do not use unqualified power cord.

CAUTION

To avoid the electric shock, 
should not open it

Caution: to avoid electric shock, please don’t 
remove the bottom. If it has any problems 
should not repair it by yourself, please entrust 
professional staff to repair it.

Summary of Contents for AC36II



















Reviews: