3
In
Source
Select
ANALOG
INPUT
Copy
CH
select
InA
InB
LCD DISPLAY
T
IME
10 Second
Load preset
F00
Def
ault Preset
Store
preset
U
01
Default
Preset
Press DOWN key two times, enter password memory setting way. OFF
mains that password does not memory. It can operate the panel follow-up
afterunlocking the passesword at first time. ON mains that password memory.
It always needs to unlock the password when open the unit every time.
Press DOWN key three times, enter signal source selection: pink noise, white
noise and sine wave 20Hz-20kHz.
Press DOWN key four times, enter copy channel selection: input or output
channel can copy freely.
Press DOWN key five times, enter delay unit setting: ms, m, ft can be chosen.
Press RECALL/SAVE key, enter below setting status
Press RECALL key, enter preset transfer. Users can transfer the saved
Settings U01-U30 and the initial setting F00.
Press SAVE key, enter preset save. Users can save the adjust status in
U01-U30. Attention that the F00 factory preset can’t save.
Press INPUT EDIT enter the settings as follows
Default preferred option is gain the scale is -60dB-+12dB.
Press DOWN key one time enter PEQ parameter setting PEQ current filter
number Is 8 ,the scale of “F” is 20Hz-20kHz, “Q” is 0.4-128, "G" is -12dB
- +12dB, the style of filter are Peak, Low-shelf, High-shelf, Low-cut, High-cut,
Allpass1, Allpass2, Bypass(ON/OFF).
LOCK Select
OFF
PEQ:1 INA
G: 0.0 FREQ: 50.7 BY
Q: 3.00 TYPE: PEAK □
Press DOWN key five times, enter linking
adjustment
selection: If the
current channel is INA, you can choose INB, INC, IND channel to adjust
parameter simultaneously, together.
Press DOWN key three times, enter delay parameter setting: the scale is
0-680mS,
0-234m, 0-769ft.
PHASE INA
0: □ 180: □
Press DOWN key four times, enter phasic adjust setting, adjustment scale is
(0/180).
Press DOWN key two times enter low-high pass parameter setting
,
the scale
of the “HP” is 20Hz -20kHz
,
“LP” is 20Hz -20kHz
,
3 different slanting rate for
low/ high pass filter Butterworth
,
Bessel
,
Linkwitz
-
Riley
,
Slanting rate
is
-6dB--48dB.
HI
&
LOW
-
PASS
INA
HP
:
19
.
6
BYPASS
LP
:
20K15
BYPASS
DELAY INA
0.000ms
0
.
000m 0.000ft
√
IN-LINK INA
A
:
□
B
:
□ C:
□
D:
□
√
GAIN INA
-60.0dB
GAIN OUT1
+0
.
0dB
Default
preferred
option
is
gain
,
the
scale
is-
60dB--12dB.
Press OUTPUT EDIT enter the settings as follow
Digital Audio Processor
