I n s t r u c t i o n m a n u a l
VMK SERIES
21
pedals
PROCEDURE: PEDAL PROGRAMMING
We will program
PEDAL INPUT 1
to transmit Sustain. For this procedure you will need a Sustain Pedal. Any polarity pedal will
work.
TIP:
The three
PEDAL INPUTS
may be programed to transmit anything from Sustain to Volume to even Modulation. A
PEDAL INPUT
,
when connected to a Volume Pedal , can transmit the same CNTRL Values as the
SLIDERS
or
KNOBS
. Remember, you have three
PEDAL INPUTS
to work with. Imagine in a live set-up, two volume pedals set-up to control two different sounds. In our set-up you
would program
PEDAL 1
so its Polarity would be DN>UP, and
PEDAL 2
so it’s Polarity would be UP>DN. By pressing down on both
volume pedals, you would fade out of one sound and fade into the other! All without awkward foot movement.
1) PRESS EDIT
2) PRESS PEDAL
In this example set the Midi
Channel to 1
Remember:
the sustain
Pedal must be plugged
into PEDAL INPUT 1
3) PRESS PAGE UP
We need to set the
CTRL Change
to
64
That's the Midi Spec for
Sustain Pedal.
4) PRESS PAGE UP
Set the
Value Min.
to 0
In this case any Value below
<64 will transmit an off Message.
5) PRESS PAGE UP
Set the
Value Max
to 127
In this case any Value above
>64 will transmit an on Message.
PRESS OR MOVE
ANY CONTROLS
SCREEN
CHANGE
EDIT PEDALS:
-1-
MIDI CHANNEL
OFF
SCREEN
CHANGE
To adjust the
Midi Channel
use the
DE
knob
EDIT PEDALS:
-1-
CTRL CHANGE
64
SCREEN
CHANGE
To adjust the
CTRL Change
use the
DE
knob
EDIT PEDALS:
-1-
VALUE MIN:
0
SCREEN
CHANGE
To adjust the
Value Min.
use the
DE
knob
EDIT PEDALS:
-1-
VALUE MAX:
127
SCREEN
CHANGE
To adjust the
Value Max
use the
DE
knob
