KEYBOARD LAYOUT: DETAILS
Back Panel
The back panel contains the connective parts of the keyboard: Dual Midi outputs and 3 independent foot controller inputs. The
pedal inputs can accept sustain or volume pedals, each capable of sending out a completely different controller message. Pedal
inputs can be programmed to accept almost any variety of manufacturers foot pedals regardless of polarity. The power adapter
input and power switch are also located in the rear panel.
Transport-Live Edit Controls
Transport and Live Edit controls are centrally located for quick access at a gig or in the studio. Simple but powerful, the Transport
can easily be programmed to control a sequencer or a drum machine. Live Edit is indispensable for a quick program change, bank
select or Midi channel change.
Sliders
Sliders are perhaps the most desirable controls in a studio setting. Each of the 9 sliders may be programmed independently. They
can send command specific messages, like volume, to a sound module. Or they can send control messages that may be routed
through a sequencer to control various functions of the program you are running. See your program manual for details. 4 banks
in total x 9 sliders gives you 36 slider commands per patch. Note: Drawbar is also a Bank.
I n s t r u c t i o n m a n u a l
VMK SERIES
10
layout keyboard
live edit controls
transport
PEDAL IN
MIDI OUT
9V
POWER
1
2
3
Adapter In
Power Switch
