studioduc juno 4 drawer dresser/changer Assembly Instructions Manual Download Page 5

Please check contents against the components list in these instructions. Also, please ensure 
there was no damage that may have occurred in shipping. If any components are missing or you 
find any damage, please contact ducduc before continuing.

To use the dresser as a changing table, insert and use the changing table tray provided with the 
dresser.

We recommend the use of a Colgate 3-Sided contour Pad (CR300-S80) if this dresser is to be 
used as a changing table.

Maximum changing pad dimensions: W16” x L33” x H5”.

Pay close attention to the safety warnings in these instructions and on dresser/changer labels.

The maximum weight of any child on top of the dresser/changer is 45 pounds.

Read all the instructions before use.

Do not use if dresser/changer is damaged or broken.

CARE AND CLEANING:

Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. Clean with mild 
soap on a soft rag. Rinse and dry thoroughly. If you ever re-finish this furniture, be sure to use 
only a non-toxic finish.

Do not attempt to move this dresser/changer alone–dragging or sliding it across a floor may 
cause structural damage. A minimum of two people is required to safely lift and reposition the 
dresser/changer.

KEEP INSTRUCTIONS FOR FUTURE USE

Please check contents against the components list in these  
instructions. Also, please ensure there was no damage that may have occurred in 
shipping. If any components are missing or you find any damage, please contact 
ducduc before continuing.

To use the dresser as a changing table, insert and use the changing table tray 
provided with the dresser.

We recommend the use of a Colgate 3-Sided contour Pad (CR300-S80) if this 
dresser is to be used as a changing table.  
Maximum changing pad dimensions: W16” x L33” x H8”. 

Pay close attention to the safety warnings in these instructions and on dresser/
changer labels. 

The maximum weight of any child on top of the dresser/changer is 45 pounds. 

Read all the instructions before use.

Do not use if dresser/changer is damaged or broken. 

CARE AND CLEANING:

Do not scratch or chip the finish. Do not use abrasive chemicals for cleaning. 
Clean with mild soap on a soft rag. Rinse and dry thoroughly. If you ever  
re-finish this furniture, be sure to use only a non-toxic finish.

 Do not attempt to move this dresser/changer alone- dragging or sliding it across 
a floor may cause structural damage. A minimum of two people is  
required to safely lift and reposition the dresser/changer.

KEEP INSTRUCTIONS FOR FUTURE USE

secure this unit to support surface using the 

mounting hardware provided. see instructions.

Summary of Contents for juno 4 drawer dresser/changer
























Reviews: