11
place changing tray (H) on top of assembled case so the pre-drilled holes at the backs
of both pieces align. starting at one side, place hardware (I) over the holes on the case
and changing tray (H). secure into place using the allen key (L) to screw in hardware
(J + K) as arranged in the picture.
still confused? scan this code to watch the assembly video!
H
I
I
J
K
H
L
I
duc insider tip!
when attaching the changing tray to the
dresser, start by loosely screwing in each
bolt over the bracket. once everything is
lined up and each of the 4 bolts are in place,
fully tighten all screws until secure.
repeat on the remaining bracket using the
same method.
