5
Step Five
Once dowels are in place and boards sit tight to the leg,
use metal corners (9) and M6 screws (11) to fix the
middle section to the leg. Repeat procedure with right
Module. Note! Turn the metal corner’s shorter edge downward
Step Six
7
Step Seven
8
10
Bring two modules closer and connect it with middle parts
one by one starting with bottom. Desk surfaces will stand
freely on metal brackets.
Push the side modules closer
until the dowels seat properly in their respective
holes in legs and and desk surfaces are tight to each
other.
6
Screw the desk tips to the legs on both left and right module.
8
Step Eight
9
Step Nine
Fix middle section to the legs using metal corners (9)
and M6 screws (11).
Install metal bar to top shelf using M6 Screws.
10
Step Ten
Install rack rails (14) to the legs using
M6 screws (12). Positions for the
screws are predefined.
Install metal brackets on the both side modules
taking into consideration height of your top shelf.
Do not do that step alone. You’ll need help of another person!
