background image

Issue 2, January 2023  

Model 792/793 User Guide 

Page 50 

Studio Technologies, Inc.

Model 792 & Model 793

 

StudioComm with Dante Support

the Model 793 will momentarily be shown. The 

System Information webpage from the Model 

792’s web server can also be used to show the 

firmware version numbers for both the Model 793 

and the Model 792.

Dante Firmware Update

As previously discussed, the Model 792 implements 

Dante connectivity using the Brooklyn module from 

Audinate. The firmware (embedded software) residing 

in the Brooklyn module can be updated using one 

of the Model 792’s Dante Ethernet ports. The Dante 

Controller software application can be used to deter-

mine the version of the firmware (embedded software) 

that resides in the Brooklyn module. The System 

Information webpage provided by the Model 792’s 

web server can also be used to identify the firmware 

version. The Dante Controller software application 

includes an automated method of updating the Brook-

lyn module’s firmware. It’s called Dante Updater and 

is very easy to use. The Dante Controller application 

is available, free of charge, on the Audinate website 

audinate.com).

The latest Model 792 Dante firmware file, with an 

extension of .dnt, is available on the Studio Technol-

ogies’ website as well in Audinate’s product library da-

tabase. The latter allows the Dante Updater software 

application that is included with Dante Controller to 

automatically update the Model 792’s Dante interface.

Restoring Factory Default Settings

A command in the System Information webpage pro-

vided by the Model 792’s web server allows most of 

the configuration settings to be restored to their factory 

default values. This can be useful but must be used 

with caution. Any customization made to the Model 

792’s configuration will be lost. This can be offset in 

a positive way by returning the Model 792 to a known 

configuration, a point that might aid in troubleshooting 

an issue. Refer to Appendix D for a list of the default 

values.

Summary of Contents for Dante 792






























































Reviews: