Issue 4, October 2016
Model 760-03/77 User Guide
Page 28
Studio Technologies, Inc.
for Surround
Configuration—Model 77 Device Address, Stereo Input C
Sample Rate Converter, and Post-Fader Stereo Monitor Output
Default:
Device address A1.
Stereo input C sample rate converter enabled.
Post-fader stereo monitor output can be enabled.
Note:
The Model 77’s device address is the only parameter stored in the Model 77. All other parameters are stored
in the Model 760-03.
Press and hold the Mute/Solo
button to display and configure the
Model 77’s device address, stereo
input C sample rate converter, and
post-fader stereo monitor output.
Use the Level control to change this
specific
Model 77’s device address
.
Address can be either A1, A2, A3, or A4.
See Note below.
These LEDs display the status of the
post-fader stereo
monitor output
function. When LED Surround is lit the
function cannot be enabled. When LED Stereo is lit the
function can be enabled. Use the button to change the
configuration.
This LED displays the configuration of the
stereo input C sample rate converter
(SRC). LED not lit means SRC is disabled;
LED lit means SRC enabled. Use the button
to change the configuration.
