Model 5422A User Guide
Issue 3, December 2022
Studio Technologies, Inc.
Page 31
Model 5422A
DANTE INTERCOM AUDIO ENGINE
preventing it from being sent to a user.) Whenever the
interrupt input is not detected as being on (determined
to be off) the interrupt audio source is not routed to an
output channel.
The Dante receiver (input) source that is designated as
program audio is always routed to the Dante transmitter
(output) program audio channel. This signal doesn’t
change and provides the IFB (1 Int-in) function’s
non-interrupt (“program” or “program only”) audio chan
-
nel. When the interrupt audio source is not detected as
being active (interrupt off state) the program audio input
signal is also routed, at full level, to the Dante transmit-
ter (output) program with interrupt channel. When the
interrupt audio source is detected as being active (on)
the level of the program audio source as it is routed
to the program with interrupt channel will be impacted
by the configured IFB Dim value. This can range from
0 dB (no level change) to a full mute (fully attenuated).
Between those extremes dim (attenuation) values of
10, 15, and 20 dB are available. Details regarding the
IFB Dim value will be reviewed in a later section.
