Studio Electronics SE-3X, User Manual

Page: 41 / 46

16
TROUBLESHOOTING
!
No Sound
Check all audio connections (and Power).
Check all MIDI connections. Ensure the ‘3X is set to receive on the correct channel. [see Setting MIDI Channel p. 25]
Exit and reset Patch. [see Escaping from an Edited Patch p. 25]
Turn up Volume. [see CONTROL p. 14]
Turn up OSC/MIX levels. [see OSC VOL 1, 2, 3 p. 17 & AUDIO MIXER PAGE p. 22]
Turn o ff MIDI sync. [see MODULATION SYNC PAGE p. 23]
Turn o ff LFO GATE. [see GATE p. 15]
Soft Sound
Check all audio connections.
Turn up Volume. [see CONTROL p. 14]
Turn up OSC/MIX levels. [see OSC VOL 1, 2, 3 p. 17 & AUDIO MIXER PAGE p. 22]
Unwanted Distorted Sound
Turn down OSC / RMOD / NOISE levels. [see OSC VOL 1, 2, 3 p. 17 & AUDIO MIXER PAGE p. 22]
Unwanted Noise
Turn down NOISE level. [see OSC VOL 1, 2, 3 p. 17 & AUDIO MIXER PAGE p. 22]
Out of Tune
Set MASTER TUNE to 440 Hz. [see p.22] Or one could experiment with 432 Hz, as was done here with our Boomstar
SEM: https://tinyurl.com/tha942f
Plain Lost
Press and hold SHIFT , press EXIT , then rotate Q dial. [see Escaping from an Edited Patch p. 25]
41