Studio Electronics SE-3X, User Manual

Page: 25 / 46

9
COMMON FUNCTIONS
!
Y ou’ll get yours - just what you deserve.
Setting MIDI Channel :
Hold
SHIFT
button and press left arrow switch 4x to get to
MIDI CHANNEL / SYSEX
PAGE
. Rotate encoder.
Saving an edited RAM Patch (banks 5-8) :
Press
SAVE
switch once; it will illuminate and
SAVE TO:
will appear.
You can save your edited patch over the stored sound by pressing the
SAVE
button once again, or you can choose a
new destination by turning the
Q
knob to select another patch location. To save to a di ff erent bank, press either the up
or down arrow switches. If you want to cancel the process or get back to the main page press the
SHIFT
button. ROM
patches (bank 1-4) can be modi fi ed but not permanently altered: save ROM bank edits to RAM (banks 1-5) locations.
Escaping from an Edited Patch :
Press and hold SHIFT and then
EXIT
(under down arrow). This will get you to the
main page; you can clear your edits by rotating the
Q
knob.
Accessing Edit Pages :
While holding the shift button press the
< >
arrow buttons or turn the Q knob.
Selecting Bank :
Press up/down buttons.
Choosing Mono or Para Mode :
Press and hold
PANEL 2
(SHIFT) then press
PARA
(OS2 SYNC).
Adjusting Oscillators
’s
2 & 3 Levels :
Press and hold
PANEL 2
(SHIFT) then rotate
FINE
knobs (OSC’s 2 & 3
frequency knobs).
Syncing LFO’s to MIDI Clock :
Press and hold
SHIFT
then rotate
Q
dial six times to travel to
MODULATION
SYNC PAGE
. Set
SYNC
to
MIDI
. Send MIDI Clock from external device.
Selecting SEM FIlter :
Turn o ff
MODE
switch in
FILTERS
panel.
Toggling LFO Gate :
Press and hold
PANEL 2
then press
GATE
.
25