14
PATCHING
!
The V30 patch points… nothing can hurt anything. We’ve patched everything everywhere, with often pleasant unexpected results—
out-to-outs as well—maybe we missed a combination/destination you might discover. Jack in external sources as modulators.
Process and warm diverse audio sources. With an external sequencer you can extract a paraphonic response from your prized
Midimini V30, addressing the individual Oscillator CV Inputs with abandon, or great care.
HAVE FUN EXPERIMENTING!
PATCH POINTS
•
CV OUT
– Control Voltage Output patch point.
•
LFO OUT
– Low Frequency Oscillator Output patch point with attenuator. Patch into
ENV OUT
with both level controls at
maximum for a sucking, release heavy transient.
•
MAIN CV IN
– Master Control Voltage Input patch point.
•
OSC1 CV
– OSC 1 Control Voltage input patch point (additive). Patch an external sequencer for expressive paraphonic control.
•
OSC2 CV
– OSC 2 Control Voltage input patch point (additive). “
•
OSC3 CV
– OSC 3 Control Voltage input patch point (additive). “
•
NOISE
– Noise Output patch point. Patch into
GATE OUT
for a reverse transient e
ff
ect—adjust level control.
•
OSC1
– Oscillator 1 Control Voltage Output patch point. Patch into
ENV OUT
with both level controls at maximum for a sucking,
release heavy transient variant.
•
EXT IN
– External Audio Input with attenuator. Give it a nice hot signal and pulse it with a sequence, or
fl
ip on the
DRONE
switch
for a steady stream of sound.
•
VCF CV
– VCF Control Voltage input patch point. Patch OSC1 into
VCF CV
for AFM via
OSC 1
, or into the individual
OSC CV
Inputs
for more of the same.
•
ENV2 OUT
– Envelope 2 Output patch point with attenuator.
•
GATE IN
– Gate Input patch point.
•
GATE OUT
– Gate Output patch point (8.2 volts).
•
VCA CV
– Voltage Controlled Ampli
fi
er Control Voltage Input patch point.
We’ll update this page as we uncover more patching secrets.
Midimini V30 User Manual
Rev. 1.29.20
35
© Analogia Inc. 2020