... 10 ...
TERMINATION
RESISTOR
DMX CONTROLLER OR LIGHT
CONSOLE
TERMINATION
RESISTOR
LAST SPOT
SPOT
EXAMPLE 2
Connection controller-spot to one DMX 512 output over 150mts long
SIGNAL AMPLIFIER
LINE > 150mts (with microphonic or audio cable)
DMX TERMINAL LINE
The wrong connection of the terminal line or its non-connection are probably the most frequent reasons for the defective functioning
of the DMX line. The terminator is a resistor fitted between the two “data” lines (pins 2 and 3 of an XLR 5 pin connector) at the end of
the cable furthest from the transmitter. The terminator resistor should have the same value as the impedance of the connection cable.
We supply a terminal with a 100 Ohm resistor.
It is recommanded that all DMX 512 systems have the termination resistor at the and of the line.
DMX CONTROLLER OR LIGHT
CONSOLE
EXAMPLE 1
Connection controller-spot with 1 DMX 512 output
LAST SPOT
SPOT
SPOT
SPOT
WARNING
!
Summary of Contents for CityColor IP54
Page 1: ...INTERNATIONAL PATENT WO99 40361 IP 54 User s and operator s manual for art 0002 0003 0004 0005...
Page 14: ...12 APPENDIX A Here below you can find the complete list of DMX values ref page 8...
Page 15: ...13 APPENDIX B Here below you can find the complete list of the available games ref page 11...
