Studer Vista 5 M3 Operating Instructions Manual Download

Page: 486 / 564

6.4.3.4

Special Configuration Function: Stems

The Stems concept is unique to the Studer Vista.

For Film style mixing, bits and pieces of film sound are put together from a

variety of surround formats, ranging from mono to eight channels. Very often,

there may be hundreds of audio sources that need to be mixed together and

put into the right spatial image. In order to bring some order to such a vast

number of sources and formats, a concept of Stems is often used.

A Stem is a group of sounds (i.e., audio summing buses) that belong together.

Stems can be 1-channel to 8-channel wide.

For example, a console may be configured to have: 2 × Stereo stems for music,

3 × LCR stems for simple effects, 1 × 5.1 stem for effects, 1 × Stereo stem

for dialog etc., 1 × 8-CH stem for effects, 2 × Dolby Surround (4-CH) stems

for predubs.

The basic Stem setup is defined in the Session Configuration – the number,

type and assignment of Stem buses is fixed. In the Studer Vista GC, there are

controls for dynamic Stem setup and for assignments of the related recorder

tracks. In this way, the Stem setup may be changed dynamically as the need

arises. The restriction to the total number of Stems is the number of buses

for a certain Session Configuration. Studer Vista Master, Mono Group and/

or Track buses are used to build a system of Stems (each stem consists of a

number of buses) up to a maximum of 104 Stem buses at any time.

Stereo stem for music

LCR stem for simple effects

5.1 stem for effects

Stereo stem for dialog, etc.

8-CH stem for effects

Dolby Surround (4-CH) stems for predubs

In this example, the bus structure has been set to allow for the above stem

configuration using multitrack buses as Stem buses. A total of 37 multitrack

Vista 5 M3 Digital Mixing System

6-28 Session Configuration

Document generated: 28.08.13

SW V4.9

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands