Studer Vista 5 M3 Operating Instructions Manual Download

Page: 437 / 564

Vista 5 M3 Digital Mixing System

AutoTouchPlus 5-141

Document generated: 28.08.13

SW V4.9

5.20 Desk Automation Controls

This chapter gives an overview of the channel strip and central automation

controls different from the ones found in the ACU window.

Channel Strips

In automation mode, the channel strips hold additional functions for detailed

display of the current status. There are some record indicators integrated

within the recording keys.

USR 1

Recording overview for switches. If half-lit: One or more switches are armed

(i.e. in

Trim Enable

Write Enable

mode). If fully lit: One or more

switches are recording.

Pressing this key will either punch-in the held objects, or punch-out the

switches currently recording.

Current and replay value of the channel mute. If the current value is different

from the one in the last mix pass, this LED indicates the value within the last

mix pass, while the main red LED within the key indicates the current value.

MUTE

Recording of the channel mute. If half-lit: Channel mute is armed (i.e. in

Trim

Enable

Write Enable

mode). If fully lit: Channel mute is recording.

Pressing this key will either punch-in the current MUTE status, or punch it

out of recording.

TALK

Recording of the fader value. If half-lit: Fader is armed (i.e. in

Trim Enable

Write Enable

mode). If fully lit: Fader is recording.

Pressing this key will either punch-in the current fader status, or punch it out

of recording.

Summary of Contents for Vista 5 M3





















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands

Studer Vista 5 M3, Operating Instructions Manual

Search results

Summary of Contents for Vista 5 M3

Reviews:

Related manuals for Vista 5 M3

Brands by name

Popular brands