manualshive.com logo in svg

Studer OnAir 2000M2, Operating And Service Instructions

The Studer OnAir 2000M2 Operating and Service Instructions manual can be downloaded for free from our website. This comprehensive manual provides detailed step-by-step instructions on how to operate and service the Studer OnAir 2000M2 product. Visit manualshive.com to download your manual now.

Share
Download
background image

OnAir 2000M2 Digital Mixing Console

Date printed: 12.11.03

SW V 4.0

Index  17-5

Save a Mic Setting .............................................. 5-10
Save a Snapshot .................................................... 5-8
Save a Snapshot/Mic Setting .............................. 5-18
SAVE CARD...................................................... 5-18
SAVE MEM ................................................5-8, 5-10
Seiko ........................................................15-22, 16-7
serial interface..................................................... 10-1
Serial Interface Module .................................... 15-21
SET LIKE DEFAULT USER............................. 11-5
Set User Routing Setup....................................... 11-6
shelving................................................................. 4-8
Shift Studio TB to N–1 ..................................... 12-17
Sign. ...................................................................... 7-6
SIGN. .........................................................8-1, 15-16
SIGN. / TB SOURCE ......................................... 12-5
Signaling ............................................................... 8-1
Signaling Lamps ................................................... 3-5
SMPTE................................................................ 16-7
SMPTE bi-phase timecode ............................... 15-22
Snapshots ............................................5-6, 5-7, 12-12
Software Structure .............................................. 13-1
Source Label Field................................................ 4-4
source selectors..................................................... 7-1
Standard Level Meters.......................................... 6-1
START................................................................ 5-24
START/STOP..................................................... 5-23
Stereo Mode.......................................................... 4-3
STOP................................................................... 5-24
stopwatch ............................................................ 5-23
STUDIO................................................................ 3-5
STUDIO MON...................................................... 5-1
STUDIO MON CTRL ...............................7-5, 15-14
STUDIO MONITOR (AUDIO) output............. 15-13
STUDIO MONITOR AUDIO............................... 7-5
studio monitoring...........................................5-5, 7-4
STUDIO MONITORING SOURCE page .....5-5, 7-4
STUDIO-MIC ................................................3-5, 8-1
SW Update.......................................................... 13-1
SW Update Procedure......................................... 13-3
SW Versions Display........................................ 14-10
Sync source ....................................................... 12-12
System Administrator ......................................... 11-1
SYSTEM CONF. .................................................. 5-6
SYSTEM CONFIG. page ................................... 12-1
system Sync page.............................................. 12-13
System Synchronization.................................... 12-12
System Test......................................................... 14-7
System Tests ....................................................... 14-1

T

talkback........................................... 3-3, 3-4, 3-5, 7-5
talkback listening ...........................................3-5, 7-5
Talkback Settings.................................................. 7-6

talkback target keys............................................... 7-5
talkback targets ..............................................3-5, 7-5
tape recorders........................................................ 9-1
TB FROM CR TO... ......................................... 12-16
TB Mic................................................................ 16-3
TB MIC IN/OUT ................................................ 15-6
TB Mic Input Module ...................... 15-6, 16-2, 16-3
TB Source ............................................................. 7-6
TB to ..................................................................... 7-5
TB to Studio.......................................................... 7-5
TB to Telephone 1 ................................................ 7-5
TB to Telephone 2 ................................................ 7-5
Technical Specifications....................................... 2-3
TEL ....................................................................... 5-1
TEL A/B ............................................................. 15-7
TEL/N–1/AUDIT.................................................. 5-3
TELEPHONE ....................................................... 5-3
Telephone Hybrid ................................................. 5-3
Telephone Hybrid Interface ................................ 16-5
Telephone Hybrid Module.................................. 15-7
termination .......................................................... 16-7
third Cleanfeed...................................................... 7-5
time ..................................................................... 12-9
Time & Date ....................................................... 12-9
TIME & DATE FORMAT page....................... 12-10
Time format .............................................5-23, 12-10
TIME page .................................................5-23, 12-9
Time setting ...................................................... 12-10
TIME SYNC ..................................................... 12-10
Time Sync Module...................................15-22, 16-7
TIME SYNC. PROTOCOL ................................ 16-7
Time Synchronization......................................... 10-4
time zone offset................................................. 12-10
time-of-day.......................................................... 5-23
TIMER START .................................................. 12-7
TOGGLE........................................................... 12-16
TOSLINK ........................................................... 15-3
touch-screen ........................................... 1-1, 3-1, 3-3
turnover frequencies ............................................. 4-8

U

user access rights ................................................ 11-1
User Administration...................................5-22, 11-4
USER ADMINISTRATION page ...................... 11-4
user channel routing setup .................................. 11-6
USER EDIT page................................................ 11-5
User Modes ......................................................... 11-1
USER NAME...................................................... 11-5
user record........................................................... 11-5
User Routing Setup............................................. 5-16
user stopwatch..............................................3-3, 5-24
Using PC-Cards .................................................. 5-17

Summary of Contents for OnAir 2000M2


































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for OnAir 2000M2

Tascam M-35 Operation And Maintenance Instruction Manual preview
M-35
Brand: Tascam Pages: 38
Tascam DM-24 Release Notes preview
DM-24
Brand: Tascam Pages: 28
Tascam DM-24 Owner'S Manual preview
DM-24
Brand: Tascam Pages: 146
Tascam DM-24 Quick Start Manual preview
DM-24
Brand: Tascam Pages: 16
Tascam Digi 001 User Manual preview
Digi 001
Brand: Tascam Pages: 12
Tapco Blend 16 Quick Start Manual preview
Blend 16
Brand: Tapco Pages: 4
Mackie Mix5 Owner'S Manual preview
Mix5
Brand: Mackie Pages: 24
Redmond HM1008G-UL User Manual preview
HM1008G-UL
Brand: Redmond Pages: 7
ALLEN & HEATH MixWizard WZ3 20S User Manual preview
MixWizard WZ3 20S
Brand: ALLEN & HEATH Pages: 32
TC Electronic Blood Moon Phaser Quick Start Manual preview
Blood Moon Phaser
Brand: TC Electronic Pages: 2
Brunetti Vanilla Owner'S Manual preview
Vanilla
Brand: Brunetti Pages: 2
Living & Co LSM350W Instruction Manual preview
LSM350W
Brand: Living & Co Pages: 12
PhDsolutions HDMIDAC2 User Manual preview
HDMIDAC2
Brand: PhDsolutions Pages: 15
Altrad ATIKA Compact 140L Original Instructions Manual preview
ATIKA Compact 140L
Brand: Altrad Pages: 76
Samson MDR1248 Owner'S Manual preview
MDR1248
Brand: Samson Pages: 28
jobmate HCM550 Owner'S Manual preview
HCM550
Brand: jobmate Pages: 11
Silvercrest 279914 Instructions Manual preview
279914
Brand: Silvercrest Pages: 56
Silvercrest 360497 2010 Quick Reference Manual preview
360497 2010
Brand: Silvercrest Pages: 61

Brands by name

Popular brands

Load more brands