Studer D19m, Service Instructions Manual, Page: 93 / 100

D19m Digital System Components
Date printed:
30.06.20
100.0
50.4 (10 M widths)
20.7
12.5
1.4
14.0
2.5
174.4
169.7
95.0
122.4
3HE (128.4)
16.0
112.0 max.
39.3
POWER SUPPLY 5 V
POWER SUPPLY UNITS
General For the power supply of the D19m frames, standard 19" units with power
factor correction are used, equipped with a Studer front panel (earlier
version: see next page).
Studer Part No. Description
1.940.606.00 Power Supply 5 V/16 A
1.940.607.00 Power Supply ±15 V/3.5 A
Important As the power supply units are safety-relevant parts, they may be serviced
only by authorized personnel using original spare parts.
For replacement or repair, contact your nearest Studer representative.
Specifications
Mains Voltage 88...264 V
Mains Frequency 45...65 Hz
Efficiency > 77%
Output Power 100 W total
Output(s) Short-circuit protected, main output(s) overload protected (110%)
Power Down (Logic Inhibit) Control input, 4...15 V
DC
, max. 15 mA, active high
Power Fail Output, open collector, active high (max. 30 V/1 mA)
Dimensions (mm)