10
USING TREBLE/BASS/BALANCE CONTROL KNOBS
• TREBLE:
Adjust TREBLE level of music playback.
• BASS
:
Adjust BASS level of music playback.
• BALANCE
:
Adjust BALANCE for balance left and right speaker.
BLUETOOTH OPERATION
PROGRAM OPERATION
This function allows the tracks to be played in a programmed sequence.
NOTE:
Programs can only be set in STOP mode.
1.
In CD stop mode, press PROGRAM button, the PROG indicator will flash. The LED display
will briefly show Program Number “01” and then track number “00” will blink on the LED
display.
2.
Press the SKIP or button to select the desired track.
3. Press the PROGRAM button to confirm the selection. Program Number advances to “02”
and shows briefly and then track number “00” will blink on the LED display.
4.
Repeat step 2 to 3 to program up to maximum of 20 tracks.
5. When maximum of 20 tracks have been programmed, the LED display will show “FL” to
indicate program is full.
6. When you have completed programming, press the PLAY/PAUSE button to start
playing. Both PROG and Play/Pause indicators are lighting steadily.
7.
To cancel programmed play, press the STOP button twice. PROG indicator goes off.
PAIRING A SMARTPHONE OR BLUETOOTH ENABLED DEVICE
The Bluetooth feature enables you to stream and play the digital music on your Bluetooth
enabled device to your unit.
1.
In power on mode, slide the FUNCTION switch to Bluetooth position, the Bluetooth
indicator will flash.
2.
The unit will start in auto connection mode and search for a previously paired device that is
active and in range (30 feet/10 meters). If found, a brief welcome melody will be heard and
Bluetooth indicator will change to solid on. If no active device is found, the unit will switch to
interactive pairing mode and the Bluetooth indicator keeps flashing.
3.
To establish a new link, turn on the Bluetooth function of your Bluetooth enabled device and
enable the search or scan feature to find “SB2145” in the list of discoverable Bluetooth
devices. Select the “SB2145” from your available device list when it appears on its screen
and a brief welcome melody will be heard if pairing and connection is successful. If you are
asked for a password, enter “0000”.
4.
If no successful pairing and connection is made within 5 minutes, the unit can enter manual
pairing mode. You need to press and hold the PAIR button until Bluetooth indicator flashes
to initiate a pairing/connecting request to a new or old Bluetooth enabled device. Follow
step #3 to complete the process.
5.
After successfully pairing and connecting your device with SB2145, the unit will emit a brief
welcome melody and the Bluetooth indicator will change to solid on. You can now play
music from your Bluetooth enabled device wirelessly to the SB2145.
6.
If you want to connect the SB2145 to another new external Bluetooth enabled device while
paired with another device, press and hold the PAIR button for few seconds to disconnect
the existing connection. The unit will emit two short beeps and Bluetooth indicator will
change to flash. Repeat steps #3 to #4 above to make a new link.
7.
Rotate the VOLUME CONTROL on the top panel to increase the listening volume gradually
until a comfortable listening level is reached.
8.
Press the PLAY/PAUSE BUTTON to control play/pause.
9.
Press the SKIP FORWARD BUTTON to skip to next song and SKIP BACKWARD
BUTTON to skip to previous song.
Summary of Contents for SB2145
Page 1: ......
