background image

 

E

5

 Stop operation immediately if any liquid or solid object should fall into the cabinet.  

 Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not 

operate properly.  

 Do not put anything in the safety slot. If you do, the laser diode will be ON when the CD door is 

still open.  

 If the unit is not to be used for a long period of time, make sure that all power sources are 

disconnected from the unit. Remove all batteries from the battery compartment.  

 This unit employs a laser. The use of controls or adjustment or performance of procedures other 

than those specified here may result in exposure to hazardous radiation.  

Should any trouble occur, remove the power source and refer servicing to qualified personnel.  

PROTECT YOUR FURNITURE 

 

This model is equipped with non-skid rubber 'feet' to prevent the product from moving 
when you operate the controls. These 'feet' are made from non-migrating rubber 
material specially formulated to avoid leaving any marks or stains on your furniture. 
However certain types of oil-based furniture polishes, wood preservatives, or cleaning 
sprays may cause the 'feet' to soften and leave marks or a rubber residue on the 
furniture. To prevent any damage to your furniture we strongly recommend that you 
purchase small self-adhesive felt pads, available at hardware stores and home 
improvement centers everywhere, and apply these pads to the bottom of the rubber 
'feet' before you place the product on fine wooden furniture. 

 
 

DEAR STUDEBAKER CUSTOMER 

 

Selecting fine audio equipment such as the unit you've just purchased is only the start of 
your musical enjoyment. Now it's time to consider how you can maximize the fun and 
excitement your equipment offers. This manufacturer and the Electronic Industries 
Association's Consumer Electronics Group want you to get the most out of your 
equipment by playing it at a safe level. One that lets the sound come through loud and 
clear without annoying blaring or distortion and, most importantly, without affecting your 
sensitive hearing.  
Sound can be deceiving. Over time your hearing "comfort level" adapts to higher 
volumes of sound. So what sounds "normal" can actually be loud and harmful to your 
hearing. Guard against this by setting your equipment at a safe level BEFORE your 
hearing adapts. 

To establish a safe level: 

  Start your volume control at a low setting. 

  Slowly increase the sound until you can hear it comfortably and clearly, and without 

distortion. 

Once you have established a comfortable sound level: 

  Set the dial and leave it there. 

Taking a minute to do this now will help to prevent hearing damage or loss in the future. 
After all, we want you listening for a lifetime. 

 
We Want You Listening For a Lifetime 

Used wisely, your new sound equipment will provide a 
lifetime of fun and enjoyment. Since hearing damage 
from loud noise is often undetectable until it is too late, 

Summary of Contents for SB2135

















Reviews: