background image

 

E

15

 

 

TROUBLE SHOOTING 

 

If you experience difficulties in the use of this music system, please check the followings 
or call 1-800-777-5331 for Customer Service. 

 
 

 

SPECIFICATION 

 
POWER SUPPLY

  AC   120V~ 60Hz, 14 W         

 

 

DC   6 x1.5V  type R14/ UM-2/ “C” size batteries (not included) 

 

FREQUENCY RANGE

    FM  88 -108 MHz 

                  

   AM  520 -1710 kHz 

 

At Spectra, environmental and social responsibility is a core value 
of our business. We are dedicated to continuous implementation of 
responsible initiatives with an aim to conserve and maintain the 
environment through responsible recycling. 
Please visit us at http://www.spectraintl.com/green.htm for more 

information on Spectra’s green initiatives or to find a recycler in your area. 

 
 

 

Symptom

 

Possible Cause

 

Solution

 

Noise or sound 
distorted on AM 
or FM broadcast. 

 

Station not tuned properly for AM or 
FM. 
FM: Telescopic antenna is not 
extended. 
AM: The bar antenna is not positioned 
correctly. 

Retune the AM or FM broadcast 
station. 
Fully extend the FM telescopic 
antenna. 
Reposition the unit until the best 
reception is obtained. 

AM or FM no 
sound. 

Unit not set to AM or FM band. 
 
Volume at minimum. 

Set the band selector to AM or 
FM position. 
Increase Volume. 

CD player will not 
play. 

Unit not in CD function mode. 
CD is installed incorrectly. 
If the CD is self-compiled, the 
media used may not be 
compatible with the player. 

Select CD function mode. 
Insert CD with label side up. 
Use better quality blank media 
and retest. 

CD skips while 
playing 

Disc is dirty or scratched. 

Wipe CD with clean cloth or use 
another disc. 

CD Intermittent 
sound 
 
 
 
 
Tape Playback 
muffled or fuzzy 

Dirty or defective disc. 
 
Dirty Pick Up lens. 
 
Player is subject to excessive 
shock or vibration. 
Tape head dirty 

Clean or replace the defective 
disc. 
Use a CD-lens cleaning disc to 
clean the lens. 
Relocate the player away from 
shock or vibration. 
Clean tape head using head 
cleaning cassette 

Summary of Contents for SB2135

















Reviews: