ST1
5.3
Using the tool
The machine has been designed for the simultaneous operation of the extraction system and
electrical or pneumatic tool.
To start it up insert the plug into the power socket. If working with an electrical tool, insert the tool
plug into the appropriate socket located on the machine front part and turn the button to
AUT
so
that extraction starts automatically when the tool is switched on. if working with pneumatic tools,
connect the compressed air to the inlet on the back.
Switch off the tool to stop the machine.
ADVICE ON THE USE OF TOOLS:
- start the tool, it is better if it is does not come into contact with the surface
to treat.
Use and Maintenance manual
19
