ST1
3.3
Intended use
The “ST1” machine, dealt with in this manual, has been designed to:
- Extract air and powder particles produced by abrasive tools while working on
painted or puttied surfaces.
- Filter the extracted air separating heavy parts.
- Release filtered air into the environment.
- Be activated/deactivated by means of a manual control.
- Be activated/deactivated automatically by the tool activation/deactivation.
- Be combined with electrical tools not exceeding 1000W or pneumatic tools
- Allow easy disposal of filtered powders.
Operators must verify the compatibility of the head assembled on the machine with the materials
and/or operations to carry out on the parts to process.
Any use and operation on the machine not foreseen in this manual, must be considered incorrect
and/or improper.
Use and Maintenance manual
15
