STUCCHI MULTISYSTEM Series, Instructions Manual

Page: 1 / 11

CONTENTS
1. General Information & Warnings
2-3. MULTISYSTEM Track
•
Recessing Track Conductors
•
End Caps
4-5. MULTISYSTEM End Feeds & Connections
•
End Power Feeds
•
Linear Joints
6-7. MULTISYSTEM ADAPTERS
•
Adapters
•
Adapter Rotation Kit & Nipple
8. MULTISYSTEM Trimless Track
•
Trimless Reinforcing Bracket
•
Trimless Mounting Bracket
9-11 MULTISYSTEM Track Fixing Accessories
Safety Warnings for products and installation
All the described operations of this instruction page must be done by specialised personnel only,
shutting of the electrical power and respecting all national installation regulations and
guidelines. A.A.G. Stucchi allows the use of only A.A.G. Stucchi parts in applications where the
MULTISYSTEM© system is installed. These parts must be installed according to the installation
instructions.
The company as a manufacturer is not responsible for the safety and functioning of the system if
parts not belonging to it are used or if any deviation from the installation instructions occurs. It is
then the user’s responsibility to ensure the electrical, mechanical and thermal compatibility
between the system and the fixtures used with it. The track, its components and also the
adapters can’t be used with accessories without the Quality/Approval mark of the region. On
A.A.G. Stucchi track one can use only A.A.G. Stucchi connections. A.A.G. Stucchi connections
can only be used with A.A.G. Stucchi tracks. Do not exceed listing loading indicated in the
relevant section and respect fixing distances during the track mounting. This track system is Class
III and is not compatible with Class I track systems or Class III track systems from other
manufacturers. Insert the appropriate power circuit protections in order to prevent short circuits
or overloads.
MULTISYSTEM INSTRUCTIONS
For more details visit our website:
www.lightingaustralia.com.au/products/lighting-track/multisystem-48v-track