- 5 -
Cont ...
1 IMPORTANT
FACTS:
READ BEFORE COMMENCING PUMP INSTALLATION
A.
Water temperature
The water entering the pump must be controlled as follows:
1.11 The maximum allowable water temperature is 35
o
C.
1.12 The minimum allowable water temperature is 4
o
C.
B.
Pipework - General
1.13 All models are supplied with a 90
o
elbow and stepped hose connector (see pump
connection section for details) which can be screwed directly into the pump
discharge
connection.
1.14 The hose connector is suitable for a range of flexible hose sizes and can be cut
to suit the selected size. For best flow use the largest bore pipe possible
minimising 90° bends. Small pipe sizes will reduce the pump performance.
C.
Electrical Installation Regulations
1.15 The electrical installation must be carried out in accordance with the current
national electrical regulations.
1.16 The electrical installation must be installed by a qualified person.