Stuart Turner Showermate 1.5 bar Single Installation Instructions Manual Download Page 18

- 18 -

GOOD PRACTICE

YOUR 1 YEAR GUARANTEE

Showermate pumps are guaranteed by Stuart Turner Limited to be free from defects in

materials or workmanship for 1 year from the date of purchase.  Within the guarantee
period we will repair, free of charge, any defects in the pump resulting from faults in
material or workmanship repairing, exchanging parts or exchanging the whole unit as we
may choose.

Not covered by this guarantee: Damage arising from improper use, unauthorised repair,

normal wear and tear and defects which have a negligible effect on the value or operation
of the pump.

Reasonable evidence must be supplied that the product has been purchased within  1

year prior to the date of claim.  

This guarantee is in addition to the purchaser's rights under any legislation presently in

force.  

In the event of a claim please telephone Stuart Turner Ltd. on 01491 572655 or return

pump with accessories removed, plugs, pipes etc.  

Proof of purchase should accompany the returned unit to avoid delay in action.
Please record here for your records.

Always flush system prior to starting a new or serviced pump.

Always ensure both sides of the pump (if applicable) are primed (filled with water)  before
starting the pump.  

DO NOT RUN PUMP DRY.

Always ensure the pump is in a positive head position with flooded suction.

Always ensure anti-vibration feet are used.

Ensure pump is sited in dry ventilated position.

Abide by the Water Supply (Water Fittings) Regulations 1999.

Always install isolating gate valve to both suction and delivery pipework.

Ensure earth continuity between suction and delivery pipes.

Always ensure pump wiring conforms with the current national electrical regulations and
installed by a competent person.

Always ensure the pump has a flooded suction.

Do not install a non-return valve, or devices which contain
non-return valves,  in the suction (inlet) pipework to the
pump.  The pump must be free to vent to the supply tanks
at all times.

Carefully check pump and pipework for leaks before leaving the installation unattended.

TYPE NO.

SERIAL NO.

DATE PURCHASED

Summary of Contents for Showermate 1.5 bar Single






















Reviews: