Stuart Turner Showermate 1.5 bar Single Installation Instructions Manual Download Page 1

Installation Instructions
For Showermate Shower
Booster Pumps

1.5 bar Single, 1.5 bar Twin, 2.0 bar Twin

INDEX

. . . . . . . . . . . . . . . . . . . . . . Page No

Product Description  . . . . . . . . . . . . . . . . 1

Application  . . . . . . . . . . . . . . . . . . . . . . . 1

Storage   . . . . . . . . . . . . . . . . . . . . . . . . . 1

Typical Installation  . . . . . . . . . . . . . . . . . 2

Pump Location  . . . . . . . . . . . . . . . . . . . . 3

Pipework . . . . . . . . . . . . . . . . . . . . . . . . . 5

Pump Connections  . . . . . . . . . . . . . . . . . 6

INDEX

. . . . . . . . . . . . . . . . . . . . . . Page No

Electrical Installation . . . . . . . . . . . . . . . . 10

Commissioning  . . . . . . . . . . . . . . . . . . . . 13

Maintenance  . . . . . . . . . . . . . . . . . . . . . . 14

Technical Specification  . . . . . . . . . . . . . . 16

Noise  . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Trouble Shooting Guide  . . . . . . . . . . . . . 17

Environment Protection   . . . . . . . . . . . . . 17

Please leave this instruction booklet with the pump as it

contains maintenance and safety information.

PRODUCT DESCRIPTION

Electric motor driven single or double-sided peripheral pump complete with an

automatic control system, consisting of flow switches and electronic controls.

APPLICATION

Showermate pumps are designed for pressure boosting applications in vented stored

water systems, inlet pressures to the pump and ambient temperatures must not exceed
the values given in the technical specifications.

This pump set must not be used for any other application without the 
written consent of Stuart Turner Limited and in particular must not be 
connected directly to the mains water supply.

This appliance is not intended for use by persons (including children) 
with reduced physical, sensory or mental capabilities, or lack of 
experience and knowledge, unless they have been given supervision 
or instruction concerning use of the appliance by a person responsible
for their safety.
Children should be supervised to ensure that they do not play with the
appliance.

STORAGE

If this pump is not to be installed immediately on receipt, ensure that it is stored in a dry,

frost and vibration free location in its original packaging.

Summary of Contents for Showermate 1.5 bar Single






















Reviews: